Functions
EBW-E100
70
12.4.3
Configuring SNMP Trap Triggering
The EBW-E100 can trigger an SNMP trap that sends a message to any recipient on
different predefined events. It is possible to create and manage a series of different
combinations of recipient and event. The SNMP traps are described in the MIB
(Management Information Base).
Triggering an SNMP trap is only possible if the settings for the SNMP traps are
configured correctly in the menu "Messages" on the page "Configuration".
Configuration via web interface (menu "Messages", page "SNMP traps")
In order to enable triggering of SNMP traps, check the checkbox
"Activate SNMP traps".
In order to download the private MIB, click on the link "Download private
MIB".
In order to create an SNMP trap, you have to define this in the section
"Create new SNMP trap". Enter the IP address or the domain name and
the associated port of the recipient into the fields "IP address or domain
name" and "Port" for this. Select from the drop-down list "Event" the
respective event for triggering the SNMP trap.
Save your settings by clicking "OK".
In order to temporarily switch off SNMP traps, uncheck in the section
"Existing SNMP traps" the check box in the column "active" in the SNMP
trap overview. Click on "OK" to confirm the settings.
In order to delete one or more SNMP traps, check in the section
"Existing SNMP traps" the check box in the column "delete" in the SNMP
trap overview. Click on "OK" to confirm the settings.
