6
InStyler
®
Ionic Ceramic Rotating Iron
Safety First -
Using your Thermal Guard
NOTE: It is recommended that you use your InStyler with the in-
cluded Thermal Guard Training Aid, to help prevent burns while you
are getting used to this unique new hot styling tool.
Attaching Your Thermal Guard Training Aid
1. Before attaching the Thermal Guard make sure the barrel of the unit is cool
to touch.
2.
To attach, snap the Thermal Guard Training Aid onto the side of the unit
directly under the ring below the barrel.
3.
Rotate the Thermal Guard Training Aid until tabs are seated in the indenta-
tions on the body of the InStyler, and the Thermal Guard Training Aid is
facing out.
4. Once it is snapped in place, you can use your InStyler as you normally would.
Removing Your Thermal Guard Training Aid
5. Before removing Thermal Guard make sure the barrel of the unit is cool to
touch.
6.
To remove the Thermal Guard Training Aid, firmly grab the Thermal Guard
Training Aid, making sure the barrel of the unit is cool,
twist
to unseat it and
pull to remove.
NOTE:
It is important to keep your InStyler clean, as hair product build-up
can accumulate on the barrel and bristles. With the unit unplugged, wipe
the outside surface only with a lightly damp cloth. Bristles can be lightly
scrubbed if necessary. Make sure the InStyler is completely dry before
plugging into any power source. Please see page 15 of this manual for
more detailed instructions on cleaning.
*Always allow the InStyler to cool before storing.
