10
InStyler
®
Ionic Ceramic Rotating Iron
Soft Curl
1.
For the curling technique, you may find it easier to remove
the Thermal Guard Training Aid while keeping in mind to be
cautious
and avoid burning your face or scalp.
(See page 6
for Thermal Guard Training Aid removal instructions.)
2.
Being careful to not burn your fingers, wrap a
section of hair around the barrel of your InSty-
ler from root to ends, with the barrel side facing
your scalp (see illustration).
3.
Gently close the InStyler onto the section of
hair. Rotate your wrist slightly to ensure the
ends of your hair are included.
Volume Boost
To give your hair a boost of even more dra-
matic volume, you can try a technique called,
“On Base Styling”
1.
To begin, wrap a section of hair around the
barrel down to the root.
2.
Place the InStyler barrel directly over the
root, close the unit and let the barrel rotate
for a few seconds. (see illustration)
3.
Open the InStyler and let the hair fall
from the barrel. (see illustration)
DO NOT
loosen newly styled sections
with fingers or comb until the hair is
completely cool to the touch. This
technique can be used anywhere
you want an extra volume boost.
4.
Let the InStyler rotate for 5 to 10
seconds on each section of hair,
then gently open the unit
letting
the hair fall from the barrel.
5.
For tighter, more defined curls, you
can let your InStyler rotate for a
few seconds longer. Let hair cool
completely before running fingers
through to separate.
