9
Oscillator 3:
If the
Waveform Selection Toggle
is in the up position, the
signal present at the
Waveform Output
will smoothly morph between
a sine waveform and a ramp waveform as the
Waveform Crossfader
moves from left to right. If the
Waveform Selection Toggle
is in the down
position, the signal present at the
Waveform Output
will be a pulse
waveform with a dedicated
PWM
control.
The
PWM
knob controls the duty cycle ratio of the pulse waveform.
•
Turning the knob clockwise will increase the +/– ratio of the
pulse wave.
•
Turning the knob anticlockwise will decrease the +/– ratio of the
pulse wave.
•
The range of the
PWM
knob was chosen to always result in a signal
with an audible duty cycle when used without external
control voltage.
Mixer
The selected waveforms of each oscillator can be mixed with a
dedicated
Level
control and output at the
Mix Output
. It is important to
note that the selected waveforms of each oscillator will output from the
Mix Output
at unity gain, so clipping can occur with extreme
Level
settings.
