Instron AutoX, Operator'S Manual

Page: 22 / 60

Chapter: Installation
22 M16-16654-EN
9. For static hydraulic frames, the procedure is almost complete because you do not
need to remove the mounting and sliding assembly from the frame. Return the M6
bolts and washers to the slots in the sliding assembly so that they do not get lost.
Each bolt threads into a nut that is under the top plate of the mounting assembly.
10. For electromechanical frames, you can also move the mounting and sliding
assembly to another frame, as follows:
Figure 6. AutoX Mounting Screws (Static Hydraulic Frame Mounting)
Top plate of
assembly
Base of AutoX
M6 x 35mm
socket head
cap screws
and M6 washers
mounting