General
A-3
Product Support:
Compatibility
The extensometers may be used with any of
the following Instron equipment:
Table Model
Static Testers
Servohydraulic
Dynamic Machines:
1120 Series
1185 Series
1190 Series
1195 Series
1197 Series
4400 Series
5500 Series
5900 Series
8800 Series
8500 Series
8000 Series
1270 Series
1250 Series
1330 Series
1) Creep Error is the difference between the
reading taken at 5 seconds and at 3 minutes after
the gauge was opened from gauge length to full-
scale deflection.
2) The electrical calibration has been factory set
at 20°C. If the Extensometer is to be used
outside the range 10 to 30°C, then it should be
manually calibrated at the required working
temperature
