User manual |
Care and maintenance
31
specialized professionals. However, the connector of the internal pad set (which is
connected to the equipment) should not be immersed with the entire length of this
accessory.
ATTENTION: NEVER sterilize any parts of the equipment or its accesso-
ries using “dry heat sterilization”, such as when using an autoclave. This
will damage the mechanical structure and compromise functioning.
Battery
If Apolus is not used for a long period of time, the battery will need to be recharged.
To recharge the battery, connect the monitor to an AC power source (110 or 220V
outlet) or a DC power source.
There are no restrictions or limitations for using the Apolus while its battery is being
recharged by an AC source or DC External source.
Returning componentes
If Apolus must be returned for repair, call Instramed for shipping instructions. Be
prepared to provide the equipment’s series number.
If possible, use the original equipment’s packaging. If this is not possible, use an
equivalent box that provides adequate protection for the monitor.
Precautions, restrictions and warnings
The Apolus is a device built according to NBR and IEC standards and therefore
offers total safety for patient and operator. However, all safety precautions
described below must be followed.
The equipment may have its operation affected by the presence of
electromagnetic power sources, such as electrosurgical equipment and
computer tomography (CT).
Electromagnetic compatibility
WARNING
Installing the Apolus requires special precautions concerning
electromagnetic compatibility according to the information contained in this
manual.
Mobile and portable RF communications equipment, such as mobile phones,
can affect the Apolus’ functioning.
