INSTEON 2844-222, Owner'S Manual, Page: 9 / 34

9
Test Motion Sensor by
tapping Motion Sensor’s
set button to simulate
motion.
Control Multiple Insteon Devices with Motion Sensor
1
On Motion Sensor, press and hold the
set button until its LED begins blinking
green then tap the set button.
3
One at a time, press and hold the set
button on each device until it double-
beeps.*
*For Insteon bulbs, remove from power and then return
to power. For devices that do not have a beeper, look
for their status LED to flash and return to normal.
2
4
Adjust each device to their desired state:
On, off, or brightness level if dimming.
Tap the set button on Motion Sensor to
exit multi-link mode.
Lamp 1
Lamp 3
Lamp 2
Appliance
50% 72% 30% ON
A B