INSTEON 2844-222, Owner'S Manual, Page: 10 / 34

10
Test Motion Sensor by
tapping Motion Sensor’s
set button to simulate
motion.
Removing Control of an Insteon Device From Motion Sensor
1
On Motion Sensor, press and
hold the set button until its LED
begins blinking green.
2
Press and hold the set button
again until its LED begins blinking
red.
3
Press and hold the controlled
device’s set button until the
device double-beeps.
*For Insteon bulbs, remove from power and then return
to power. For devices that do not have a beeper, look
for their status LED to flash and return to normal.