INSTEON 2844-222, Owner'S Manual, Page: 11 / 34

11
Test Motion Sensor by
tapping Motion Sensor’s
set button to simulate
motion.
Removing Control of Multiple Insteon Devices From Motion Sensor
1
On Motion Sensor, press and hold the
set button until its LED begins blinking
green.
3
One at a time, press and hold the set
button on each device until it double-
beeps.*
*For Insteon bulbs, remove from power and then return
to power. For devices that do not have a beeper, look
for their status LED to flash and return to normal.
2
4
Press and hold the set button again until
its LED begins blinking red then tap the
set button.
Tap the set button on Motion Sensor to
exit multi-unlink mode.
A B