background image

 

Page 14 of 14                                                                                                             Rev: 1/8/2013 7:36 PM

 

 

 

European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with 

unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.  

 

It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or 

local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health.  

For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal  service, or the shop 

where you purchased the product. 

 

 

DECLARATION OF CONFORMITY TO R&TTE DIRECTIVE 1999/5/EC for the European Community, Switzerland, Norway, Iceland and Liechtenstein 

 

Product category: general consumer (category 3). 

 

English: This equipment is in compliance with the essential requirements and other relevant provisions of the European R&TTE Directive 1999/5/EC 

Deutsch [German]: Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU. 

Nederlands [Dutch]: Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC. 

Svenska [Swedish]: Denna utrustning står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av 

direktiv 1999/5/EG. 

Français [French]: Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC 

Español [Spanish]: Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/CE. 

Português [Portuguese]: Este equipamento está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC. 

Italiano [Italian]: Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE. 

Norsk [Norwegian]: Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF. 

Suomi [Finnish]:Tämä laite tÿttää direktiivin 1999/5/EY olennaiset vaatimukset ja on siinä asetettujen muiden laitetta koskevien määräysten mukainen. 

Dansk [Danish]: Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF. 

Polski [Polish]: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami okreslonymi Dyrektywą UE: 1999/5/EC 

 

 

In 2002, the European Union introduced the Directive on Waste Electrical and Electronic Equipment (WEEE). The main 

aim of the Directive is to ensure that WEEE is collected and treated separately. WEEE may contain hazardous substances 

that should not end-up in the (human) environment because it can have adverse effects on it.Furthermore, WEEE is a vast 

source of raw materials. With the ever-rising worldwide demand for new equipment and the ever-decreasing volume of raw 

materials in nature, letting this potential source of such materials go to waste is unacceptable. If equipment is collected 

separately, the equipment can be recycled and up to 85 to 90% of the equipment can be reused as new material, saving 

the use of virgin raw materials and energy of producing these. Separate collection and treatment of WEEE will thus 

decrease CO2 emissions as well. For the above reasons, INSTEON expects end-users to dispose of the material in an 

environmentally friendly way through separate collection and treatment. Electrical and Electronic Equipment is labeled with 

the following 'crossed out wheeled bin' symbol indicating that the equipment should be disposed of, by the end-user, 

separate from other types of waste. End-users should contact their dealer/distributor or our company on disposal, 

collection and recycling options in their country. 

Limited Warranty 

Seller warrants to the original consumer purchaser of this product that, for a period of two years from the date of purchase, this product will be free 

from defects in material and workmanship and will perform in substantial conformity to the description of the product in this Owner’s Manual. This 

warranty shall not apply to defects or errors caused by misuse or neglect. If the product is found to be defective in material or workmanship, or if the 

product does not perform as warranted above during the warranty period, Seller will either repair it, replace it, or refund the purchase price, at its 

option, upon receipt of the product at the address below, postage prepaid, with proof of the date of purchase and an explanation of the defect or error. 

The repair, replacement, or refund that is provided for above shall be the full extent of Seller’s liability with respect to this product. For repair or 

replacement during the warranty period, call 866-243-8022 with the Model # and Revision # of the device to receive an RMA# and send the product, 

along with all other required materials to:  

 

INSTEON 

ATTN: Receiving 

16542 Millikan Ave. 

Irvine, CA 92606-5027 
Limitations 

The above warranty is in lieu of and Seller disclaims all other warranties, whether oral or written, express or implied, including any warranty or 

merchantability or fitness for a particular purpose. Any implied warranty, including any warranty of merchantability or fitness for a particular purpose, 

which may not be disclaimed or supplanted as provided above shall be limited to the two-year of the express warranty above. No other representation 

or claim of any nature by any person shall be binding upon Seller or modify the terms of the above warranty and disclaimer.  

Home automation devices have the risk of failure to operate, incorrect operation, or electrical or mechanical tampering. For optimal use, manually verify 

the device state. Any home automation device should be viewed as a convenience, but not as a sole method for controlling your home.  

In no event shall Seller be liable for special, incidental, consequential, or other damages resulting from possession or use of this device, including 

without limitation damage to property and, to the extent permitted by law, personal injury, even if Seller knew or should have known of the possibility of 

such damages. Some states do not allow limitations on how long an implied warranty lasts and/or the exclusion or limitation of damages, in which case 

the above limitations and/or exclusions may not apply to you. You may also have other legal rights that may vary from state to state.  

Protected under U.S. and foreign patents (see 

www.insteon.com

)

 

© Copyright 2013 INSTEON, 16542 Millikan Ave., Irvine, CA 92606, 866-243-8022, www.insteon.com

 

 

 

Summary of Contents for 2633-422















Reviews: