INSTANTA LIMITED
Canning Road, Southport, Merseyside PR9 7SN
Tel: (01704) 501114 Fax: (01704) 501115
IB27 - ISS:04
To reset boiler safety controls;
Switch off at the mains power supply and allow the
boiler to cool down for ten minutes before switching
back on (the safety device should automatically reset).
If the boil-dry cut-out has activated, this will require
a manual reset. Contact Instanta Technical Support
department for assistance with this.
In any of these events the indicator lamp will flash red
or green or red and green. If the problem reoccurs
contact the Instanta Service Department –
01704 502911
• Dripping Taps. These components are subject to
wear & tear but in the event of a tap failing
within 12 months of installation, we will be
pleased to replace the tap assembly by post.
Fitting is very simple and requires no tools.
An engineer call out is not necessary.
• Accidental damage, misuse or use not in
accordance with these instructions and damage
caused by incorrect installation.
The manufacturer disclaims any liability for incidental,
or consequential damages.
Safety Caution: Isolate boiler from
power supply before removing any
outer panels or attempting any reset.
FM 36413
EMS 75807
