Instant-Dict ED 350C, User Manual

Page: 198 / 249

CHAPTER 7 PCSynC And downloAd PRogRAm
184
7.1.5 Synchronization
A. Before synchronization, you should connect one terminal of the
transmission cable to the data link jack of the main unit and the
other end to the USB port of your PC.
B. Run PC Sync. program and enter “PC Sync.” in System menu.
Click “Start”, then click “Communication” from “File” of the PC
Sync. program, the following screen will be shown on the PC:
Note: Regarding the setting, if “Send (PC to Instant-Dict)” is chosen,
data in the computer will be added / replaced those in the elec-
tronic dictionary; if “Receive (Instant-Dict to PC)” is chosen, data
in the electronic dictionary will be added / replaced those in the
computer; if “PC Synchronization” is chosen, data in the elec -
tronic dictionary and your computer will be synchronized. As for
the setting of conditions, please refer to Synchronization Setup.
C. The appearance of dialogue box “Completed transmission!” indi-
cates that synchronization is completed.
7.1.6 Corresponding Table of InSTAnT-dICT & oUTlooK
The table shows the corresponding names used in INSTANT-DICT
and OUTLOOK in your PC.