2
1. Overview
1.1 Description of Console (P/N: IC3000V01)
TOP VIEW
1.
EMERGENCY button
2.
NURSE button
3.
CANCEL button
4.
Volume Control
5.
Microphone
6.
POWER LED
7.
STATUS LED
8.
Speaker
REAR VIEW
9.
Line in jack (plug into tel. wall jack)
10.
Phone jack (plug into user’s tel.)
11.
USB Port (for programming only)
BOTTOM VIEW
12.
Backup battery switch
Locating a suitable position for the Console.
•
The console should be placed on a flat surface
such as a countertop or table, and located in an
area that is easily accessible.
•
The console requires main power and a
constant telephone connection.
•
The console should be located in the same
room as the telephone jack it is connected to.
•
The console should not be placed in a damp
location such as a bathroom.
•
The console should not be placed close to any
heat source, such as direct sunlight, microwave
oven, which can reduce signal strength.
•
The console should not be located alongside
other radio transmitting devices such as a
mobile phone, cordless phone, or wireless
computer network (Wi-Fi) devices.
1.2 Power and Battery Information
•
Primary Voltage Input: 100-240VAC 50/60
Hz 0.2A; and Output 12VDC: 500mA.
•
Rechargeable battery (Ni-MH, 7.2V, 700mAh) is
located inside the console, which serves as a
backup in case of a power failure.
•
When the battery is fully charged, it serves as a
backup power source for a period of at least
24hrs. It can take up to 48hrs to fully charge the
battery. 24hr test performed in the toggle mode
(1 way voice).
•
Battery switch (located at the bottom of console)
is set to
ON
by default. If switched to
OFF
, the
battery will be disconnected and will not be
charged, nor will it serve as a backup power
source when AC power is missing.
