FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY
- 5 -
ADDITIONAL NOTES:
Temperature
NOTE
Fahrenheit/Centigrade (Celsius)
Conversion
The temperature controller can be
programmed to display either °F or °C.
To change:
Press the
MODE
button until the
temperature is displayed, then push and
hold the
SET
button for 10 seconds.
Timer
•
The controller has a count down timer that
automatically activates a buzzer at the
completion of the application.
•
Timer display is minutes:seconds. Range is
00:00
to
10:00
, Colons (:) flash while timer is
running.
NOTE
The timer or buzzer may be stopped
while the handle is in the down
position by pressing both the DOWN
(
↓
) arrow button and the UP (
↑
)
arrow
button simultaneously. The timer will
automatically reset after the handle is
raised.
Counter
The controller has a built in cycle counter.
•
Press
MODE
button until the counter is
displayed.
•
Counter display range is 0000 to 9999.
•
To reset the cycle counter, display the counter
reading, then push and hold both UP (
↑
) and
DOWN (
↓
) arrow buttons for 3 seconds until
the counter resets to zero (
0000
) on the
display.
Summary of Contents for 204.1
Page 1: ...MODEL 204 1 MNL90008 08 31 05 Rev G Operation and Maintenance Manual ...
Page 2: ......
Page 9: ......
