48
Chapter Seven Operating System Installation
Chapter Seven Operating System Installation
prompt interface, select the driver “Floppy Disk Driver (A:)”;
(4) The system will search the driver automatically. In the interface of “Choose to
install the driver”, click <Next> to continue;
(5) The addition of disk controller driver is completed.
If Inspur driver U disk is used:
If Inspur driver U disk is used:
(1) Please make the disk controller driver in the Inspur driver U disk
Inspur driver U disk [3.5
fl
oppy
disk (A :)] partition.
(2) When powering up and starting the server installation operating system, please
connect Inspur driver U disk to the USB interface of the server;
(3) In the interface of “Where do you want to install Windows?”,select <Load
Driver>;
(4) The system pops up the “Load Driver” window to prompt: to install the device
driver needed to access your hard drive, insert the installation media containing the
driver
fi
le, and then click OK. Here directly select <OK>;
(5) The system will search the driver automatically. In the interface of “Choose to
install the driver”, click <Next> to continue;
(6) The addition of disk controller driver is completed.
9. In the disk partition operation interface, select <Drive Options> and we can
perform the following operation:
⊙
It can delete the existing partitions by selecting the existing partitions and then
It can delete the existing partitions by selecting the existing partitions and then
clicking <Delete>.
clicking <Delete>.
⊙
It can format the partitions by selecting the existing partitions and clicking
It can format the partitions by selecting the existing partitions and clicking
<Format>.
<Format>.
⊙
It can create new partitions by selecting unallocated disk spaces and then click-
It can create new partitions by selecting unallocated disk spaces and then click-
ing <New> to create new partitions.
ing <New> to create new partitions.
You can operate according to the actual demands. Here we’d expound on the issue
when there are no existing partitions in the disk.
(1) Select the unallocated space, click <New>, delete the number in the Size input
box, then input the one you want to create (unit: MB) and click <Apply> to continue.
Note: we suggest the partition should be larger than 30GB.
Note: we suggest the partition should be larger than 30GB.
(2) Select the newly created disk partition, then click <Format>, and click <OK>
at the prompt con
fi
rmation interface.
(3) After formatting the partition, click <Next> to continue.
10. The system starts to install Windows, and it will complete operations of