Inspur AS500H, User Manual

Page: 4 / 56

Safety Rules
1. The power supply equipment in the system may generate high voltage and dangerous
electrical energy and thus cause personal injury. Please do not dismount the cover of the host or to
dismount and replace any component in the system by yourself, unless otherwise informed by
Inspur, only maintenance technicians trained by Inspur have the right to disassemble the cover of
the host, dismount and replace the internal components.
2. Please connect the equipment to appropriate power supply, and the power should be
supplied by external power supply which is indicated on the rated input label. To prevent your
equipment from damages caused by momentary spike or plunge of the voltage, please use relevant
voltage stabilizing equipment or uninterruptible power supply equipment.
3. If extended cables are needed, please use the three-core cables matched with correct
earthed plug, and check the ratings of the extended cables to make sure that the sum of rated
current of all products inserted into the extended cables do not exceed 80% of the limits of the
rated currents of the extended cables.
4. Please be sure to use the supplied power supply component, such as power lines, power
socket (if supplied with the equipment) etc. For the safety of equipment and the user, do not
replace randomly power cables or plugs.
5. To prevent electric shock dangers caused by leakage in the system, please make sure that
the power cables of the system and peripheral equipment are correctly connected to the earthed
power socket. Please connect the three-core power line plug to the three-core AC power socket
that is well earthed and easy to access, be sure to use the earthing pin of power lines and do not
use the patch plug or the earthing pin unplugged with cables. In case of the earthing conductors
not installed and it is uncertain whether there are appropriate earthing protections, please do not
operate or use the equipment. Contact and consult with the electrician.
6. To avoid short circuit of internal components and fire or electric shock hazards, please do
not fill any object into the open pores of the system.
7. Please place the system far away from the cooling plate and at the place with heat sources,
and be sure not to block the air vents.
8. Be sure not to scatter food or liquid in the system or on other components, and do not use
the product in humid and dusty environment.
9. The replacement of batteries with those of another model may cause explosion. When
replacement of batteries is required, please consult first the manufacturer and choose batteries of
the same or a similar model recommended by the manufacturer. Do not dismount, extrude and
pink the batteries or make the external connection point short circuit, and do not expose them in
the environment over 60°C. Never throw them into fire or water. Please do not try to open or
repair the batteries, and be sure to reasonably deal with the flat batteries and do not put the fl at
batteries, the circuit boards that may include the batteries and other components with other wastes.
For relevant battery recovery, please contact the local waste recovery and treatment mechanism.