1.
Attach the Climb Boards (6 and 7) on the two Leg B (3) (the Ring Block for the Climb Boards was melded on each of
them), in the proper order show on the figure above.
2.
Attach the two Fixed Clips (5) on the two Leg B (3), Fasten them with screws (E2).
1. Assemble the two Leg A (2) into the Leg Clips on one endow the Top Support Bar (1), aligning the holes on Leg A (2) with
the holes on the Leg Clips, then fasten them together with (A2) ,washers (X2) and safety nuts (U2).
2. Assemble the leg of the Leg C (4) (the Climb Rope has enclosed) and the Climber by the same way as step
1 and finish
assembling the main rack. (See scale figure above)
ASSEMBLY INSTRUCTION OF CLIMBER
ASSEMBLY INSTRUCTION OF THE MAIN RACK
Reserve holes in order to
assemble the slide here
