Insportline ProfiGym C95, User Manual

Page: 14 / 21

14
1. Start with the Upper Cable (39):
a) With Upper Cable (39) in groove of Pulley (56) through Upper Cross Beam (16).
b) Install Pulley NO.1 (56) to Upper Cross Beam (16), using one M10X40mm Hex Bolt (82), two
M10 Washers (93) and one M10 Nylon Nut (97).
c) Install Pulley NO.2 (56) to Main Frame (6), using one M10X40mm Hex Bolt (82), two M10
Washers (93) and one M10 Nylon Nut (97).
d) Install two Pulleys No.3&5 (56), four Steel Bushings (49mm) (57) and Pulley Cover (19) to
between of Left and Right Connect Frames (18&20), using two Shafts (M10) (48), four M10
Washers (93) and four M10 Nylon Nuts (97).
e) Install Pulley NO.4 (56) to Main Frame (6), using one M10X40mm Hex Bolt (82), two M10
Washers (93) and one M10 Nylon Nut (97).
f) Install Pulley NO.6 (56) to Main Frame (6), using one M10X40mm Hex Bolt (82), two M10
Washers (93) and one M10 Nylon Nut (97).
g) Install Pulley NO.7 (56) to Main Frame (6), using one M10X40mm Hex Bolt (82), two M10
Washers (93) and one M10 Nylon Nut (97).
h) Install Pulley NO.9 (56) to Upper Cross Beam (16), using one M10X40mm Hex Bolt (82), two
M10 Washers (93) and one M10 Nylon Nut (97).
i) Attach the bolt end of Upper Cable (39) to Selector Shaft (14) with Plastic Washer (101).
j) Install Pulley NO.8 (56) to two Pulley Patches (25), using one M10X40mm Hex Bolt (82), two
M10 Washers (93) and one M10 Nylon Nut (97).
k) Attach Lat Bar (17) to the other end of Upper Cable (39), using one Pothook (42).