background image

Safety Instructions 

     

 

 

   

 

• To ensure the best safety of the exerciser, regularly 
check it on damages and worn parts. 
   

 

 
• If you pass on this exerciser to another person or if 

you allow another person to use it, make sure that 
that person is familiar with the content and 
instructions in these instructions. 

 
• 

Only one person should use the exerciser at a time

   
• Before the first use and regularly make sure that all 

screws, bolts and other joints are properly tightened 
and firmly seated. 

 
• Before you start your work-out, remove all 

sharp-edged objects around the exerciser. 

 
• Only use the exercise for your work-out if it works 

flawlessly. 

   

 

• Any broken, worn or defective part must immediately 

be replaced and/or the exerciser must no longer be 
used until it has been properly maintained and 
repaired. 

   
• Parents and other supervisory persons should be 

aware of their responsibility, due to situations which 
may arise for which the exerciser has not been 
designed and which may occur due to children’s 
natural play instinct and interest in experimenting. 

 
• If you do allow children to use this exerciser, be sure 

to take into consideration and assess their mental 
and physical condition and development, and above 
all their temperament. Children should use the 
exerciser only under adult supervision and be 
instructed on the correct and proper use of the 
exerciser. The exerciser is not a toy. 

 
 
 
 
 
 
 
 
 
 
 
 
 

• Make sure there is sufficient free space around 

the exerciser when you set it up. 

 
• To avoid possible accidents, do not allow children 

to approach the exerciser without supervision, 
since they may use it in a way for which it is not 
intended due to their natural play instinct and 
interest in experimenting. 

 
• Please note that an improper and excessive 

work-out may be harmful to your health. 

 
• Please note that levers and other adjustment 

mechanisms are not projecting into the area of 
movement during the work-out. 

   

 

 • When setting up the exerciser, please make 

sure that the exerciser is standing in a stable 
way and that any possible unevenness of the 
floor is evened out. 

 
 • Always wear appropriate clothing and shoes 

which are suitable for your work-out on the 
exerciser. The clothes must be designed in a 
way so that they will not get caught in any part 
of the exerciser during the work-out due to their 
form (for example, length). Be sure to wear 
appropriate shoes which are suitable for the 
work-out, firmly support the feet and which are 
provided with a non-slip sole. 

 
 • Be sure to consult a physician before you start 

any exercise program. He may give you proper 
hints and advice with respect to the individual 
intensity of stress for you as well as to your 
work-out and sensible eating habits. 

 
 
 
 
 
 

 

Summary of Contents for Oberon 4464


















Reviews: