Insportline IN 9101, User Manual

Page: 9 / 22

ASSEMBLING THE SUPPORT FRAME TO LOWER MAIN FRAME
A) Hold the support frame (24) close to the bottom main frame (1) and connect the bottom sensor cord (27) of
the support frame (24) to the center sensor cord (52) of the bottom main frame (1).
Ensure proper connection of the cords or no signal will be transmitted to the computer (40). The
cord connections must be located on the inside of the frame and must not protrude in order to
prevent damage to the cords.
B) Connect the support frame (24) to the bottom main frame (1) using a hexagon bolt (30), two washers (29)
and a nut (28). Install on washer (29) each under the screw head and under the nut (28). Insert the safety pin
(31) into the second hole of the main frame (1). Place on cover cap (35) on the hexagon nut (30) and the nut
(28).
When connecting the support frame (24) to the bottom main frame ( 1), ensure that the hexagon
nut (30) is located in the upper opening and the safety pin (31) is inserted into the bottom
opening.
C) Attach the two pedals (12 R+L) using two cross-head screws (10) each, two spring clips (50) and two
washer (11) to the pedal pipes (22).
9