background image

 

 

SAFETY INSTRUCTIONS 

 

To ensure the best safety of the exerciser, regularly check it on damages and worn parts. 

 

If you pass on this exerciser to another person or if you allow another person to use it, make 

sure that that person is familiar with the content and instructions in these instructions. 

 

Only one person should use the exerciser at a time. 

 

Before the first use and regularly make sure that all screws, bolts and other joints are properly 

tightened and firmly seated. 

 

Before you start your work-out, remove all sharp-edged objects around the exerciser. 

 

Only use the exercise for your work-out if it works flawlessly. 

 

Any broken, worn or defective part must immediately be replaced and/or the exerciser must no 

longer be used until it has been properly maintained and repaired. 

 

Parents  and  other  supervisory  persons  should  be  aware  of  their  responsibility,  due  to 

situations  which  may  arise  for  which  the  exerciser  has  not  been  designed  and  which  may 
occur due to children’s natural play instinct and interest in experimenting. 

 

If  you  do  allow  children  to  use  this  exerciser,  be  sure  to  take  into  consideration  and  assess 

their  mental  and  physical  condition  and  development,  and  above  all  their  temperament. 
Children  should  use  the  exerciser  only  under  adult  supervision  and  be  instructed  on  the 
correct and proper use of the exerciser. The exerciser is not a toy. 

 

Make sure there is sufficient free space around the exerciser when you set it up. 

 

To  avoid  possible  accidents,  do  not  allow  children  to  approach  the  exerciser  without 

supervision, since they may use it in a way for which it is not intended due to their natural play 
instinct and interest in experimenting. 

 

Please note that an improper and excessive work-out may be harmful to your health. 

 

Please note that levers and other adjustment mechanisms are not projecting into the area of 

movement during the work-out. 

 

When setting up the exerciser, please make sure that the exerciser is standing in a stable way 

and that any possible unevenness of the floor is evened out. 

 

Always  wear  appropriate  clothing  and  shoes  which  are  suitable  for  your  work-out  on  the 

exerciser. The clothes must be designed in a way so that they will not get caught in any part of 
the  exerciser  during  the  work-out  due  to  their  form  (for  example,  length).  Be  sure  to  wear 
appropriate  shoes  which  are  suitable  for  the  work-out,  firmly  support  the  feet  and  which  are 
provided with a non-slip sole. 

 

Be sure to consult a physician before you start any exercise program. He may give you proper 

hints  and  advice  with  respect  to  the  individual  intensity  of  stress  for  you  as  well  as  to  your 
work-out and sensible eating habits. 

IMPORTANT NOTES 

 

Assemble  the  exerciser  as  per  assembly  instructions  and  be  sure  to  only  use  the  structural 

parts  provided  with  the  exerciser  and  designed  for  it.  Prior  to  the  assembly,  make  sure  the 
contents of the delivery is complete by referring to the parts list of the assembly and operating 
instructions. 

 

Be sure to set up the exerciser in a dry and even place and always protect it from humidity. If 

you  wish  to  protect  the  place  particularly  against  pressure  points,  contamination,  etc.,  it  is 
recommended to put a suitable, non-slip mat under the exerciser. 

Summary of Contents for IN 8721






















Reviews: