7
ASSEMBLY INSTRUCTIONS
STEP 5
:
:
:
:
NOTE: Oil Bushing (small) (31) have been Pre-assembled into the Upper Cross Beam (9).
1. Attach the Press Bar (10) to the Upper Cross Beam (9), using one M12X120mm Hex Bolt
(52), two M12 Washers (61) and one M12 Nylon Nut (65).
2. Remove two M12 Nylon Nut (65) and M12 Washer (61) from the Left Butterfly Arm (11) and
the Right Butterfly Arm (12).
3. Tap the Oil Bushing (Big) (32) to the Press Bar (10).
4. Attach the Right Butterfly Arm (12) and the Left Butterfly Arm (11) to the Press Bar (10),
using two M12 Washers (61) and two M12 Nylon Nuts (65).
5. Slide the Arm Foam Roller(24) onto the Right Butterfly Arm(12) and the Left Butterfly Arm
(11).
6. Remove two M10X20mm Hex Bolts(57) and M10 Washers(62) from the Handle Tubes(18).
7. Attach the Handle Tubes (18) to the Right Butterfly Arm (12) and the Left Butterfly Arm (11),
using two M10X20mm Hex Bolts (57) and two M10 Washers (62).
8. Slide two Middle-empty Plugs (
□
38X
¢
26) (43) and two Handle Grips (46) to the Right
Butterfly Arm (12) and the Left Butterfly Arm (11).
9. Attach the Tobacco-pipe (20) to the Support Frame (8), using one M8X40mm Hex Bolt (59),
two M8 Washers (63) and one M8 Nylon Nut (67).
10. Slide the Washer (
∅
30X
∅
10)(64) and the Plum Blossom Nut(30) onto the Tobacco-pipe
(20).
Summary of Contents for IN 7185
