background image

Special tips: 

Before  installation  and  operation,  please  read  this  operation  manual  carefully  and  save  this  manual  for  future 
reference. 

TIPS FOR SAFETY 

We  have  considered  more  for  safety  when  we  design  and  produce  this  item.  However,  in  case  of  any 
unhappiness, please pay attention to these tips. We don’t assume responsibility if any accident cased by follow 
tips.  

 

According  to  your  health  condition,  please  exercise  properly.  Overload  or  improper  exercise  will 

damage your health.  

 

While running, you should dress properly. Don’t dress too loosely in case your clothes are entangled by 

the  machine.  And  please  wear  sport  shoes.  Don’t  let  your  children  or  pet  play  near  it  to  avoid 
unnecessary injury.  

 

This  machine  is  not  suitable  for  children.  For  patients  or  the  disabled  to  use,  they  have  to  follow  the 

guides by their guardians or doctors.  

 

Don’t use this machine when in outdoor, high humidity condition or sun. 

 

Please pull the plug off from socket and keep the safe key, when the treadmill is unused. 

 

This machine is for home use, not suitable for professional exercise or testing, and also not suitable for 

medical purpose. 

 

The heart rate on this machine is not suitable for medical. 

 

If any damage  for power  wire, please ask  manufacturer or professional service to replace it in case of 

any danger. 

 

Please check all the parts before using. Make sure that all the nuts or screws are fastened. 

 

Place your treadmill on the clean, flat and solid floor. Make sure that there is not anything pointy, water 

or hot near to the machine. 

 

Please stop exercising immediately and consult your doctor if you’re feel giddy, surfeit, thorax ache or 

other symptoms. 

 

Make sure that hands are not near to running parts. Don’t put your hands or foots under the running belt. 

 

When running this machine, it is only for one person to use it! 

 

Please use the spare parts from us, it is not acceptable if you use spare parts from others. 

 

This machine is HC level, max weight shall be less than 180 kg. 

 

Please consult your doctor at first before running, if you have one of the following diseases. 

1.

 

Cardiopathy,  hypertension,  sugar  diabetes,  respiratory  disease,  smoking,  and  other  chronic 

diseases, complication disease. 

2.

 

If you are over 35 years old and heavier than common weight. 

3.

 

Women in pregnant or in breasting period. 

SPECIAL TIPS FOR SAFETY  

 

Please use qualified socket. If the plug and the socket is not compatible, please ask electrician to handle 

it and don’t do anything for the plug. 

 

The voltage for this machine is 220V-240V AC. 

 

Don’t  let  power  wire  touch  roller,  and  also  don’t  put  power  wire  on  the  running  belt.  Don’t  use 

damaged plug. 

Summary of Contents for IN 6938 Gilavar
























Reviews: