6
VIEW
ASSEMBLY INSTRUCTION
GENERAL:
Remove all the part of your cycle from the carton and place them to the floor carefully. Assembling
your cycle is simple. Follow these instructions carefully and it should take you around 15-20 minutes.
STEP 1 ATTACH STABILIZERS
The pin (40) from the folded main frame (1) in the unplug, and then start open the machine, and attach
pin(40) into the hole after the main frame(1) open.
Attach rear stabilizer (31) with 2 adjustment end caps (38) to the welded cross bar bracket of
main frame (1) and fasten with 2 curved washers(47) , spring washer(46) , 2 carriages bolts(44)
and 2 cap nuts(45)
.
Attach front stabilizer (32) with 2 transportation wheels (37) to the welded cross bar bracket of
main frame (1) and fasten with 2 curved washers(47) , spring washer(46), 2 carriage bolts(44)
and 2 cap nuts(45)
.
And then fasten each one piece tightly.
