![background image](http://html1.mh-extra.com/html/insportline/in-5561/in-5561_user-manual_2069029021.webp)
21
STEP 19
Remove four M5x12 Bolts (29) from the Computer (28). Remove bolts with the Multi Hex Tool with Phillips
Screwdriver provided.
Connect the Extension Sensor Wire (26) and Extension Wires (27) to the wires that come from the Computer
(28). Tuck wires into the Front Handlebar Post (34). Attach the Computer (28) onto the top end of the Front
Handlebar Post (34) with four M5x12 Bolts (29) that were removed. Tighten bolts with the Multi Hex Tool with
Phillips Screwdriver provided.
CORRECT WORKOUT POSITION
When exercising, please sit on the seat cushion and hold the handlebar by hands, your legs should extend almost
fully, keeping a small bend in the knee. Step on the both pedals.
When pedaling do not lock out your knees, at the bottom of the pedaling motion there should be a slight bend in
the knee. Keep your head and body in a neutral position. Always try to pedal the recumbent bike with a smooth
motion.
HOW TO MOVE THE RECUMBENT BIKE
This recumbent bike has a pair of Transport Wheels built into the front stabilizer and can be carefully tilted onto
its Transport Wheels for easy moving and storage.
To move the recumbent bike, firmly grasp the Rear Stabilizer with both hands. Next, carefully lift the recumbent
bike up until it rolls freely on the Transport Wheels.
CAUTION: It is suggested you always use the aid of a second person when moving the recumbent bike.
Summary of Contents for IN 5561
Page 7: ...7 OVERVIEW DRAWING...