21
MAINTENANCE
Lubrication
Apply oil directly on wooden board and inner part of running belt, it reduces the friction and prolong the
lifespan.
Lift the belt on one side and reach its inner side. If the inside of the belt is damp, lubricant is not
required. Otherwise, oil must be applied. During the first 3-4 minutes of applying the lubricant, set the
belt speed to a low speed to spread the lubricant evenly.
WARNING
: Do not apply oil outside of the board. Remove the excess lubricant immediately.
•
During everyday use lubricate 1x per month. During cold weather check the oil more often, oil
can dry faster.
•
Always use silicon oil inSPORTline.
CONTROL PANEL
FUNCTIONAL BUTTONS
MODE
– Press to select functions.
SET
– To set the values of time, distance and calories when not in scan mode.
RESET
– Press to reset time, distance and calories.
FUNCTIONS AND OPERATION
1.
SCAN: Press “Mode” button until “SCAN” appears, monitor will rotate through all the 5
functions: Time, Speed, Distance, Calorie and Total Distance. Each display will be hold 4
seconds.
2. TIME:
A. Count the total time from exercise start to end.
B.
Press “MODE” button until “TIME” appears, press “SET” button to set exercise distance.
When the “set” is zero, the computer will alarm 15 seconds.
3. SPEED: Display current speed.
4. DISTANCE (DIST):
A. Count the distance from exercise start to end.
B.
Press “MODE” button until “DIST” appears. Press “SET” button to set exercise distance.
When
the “set” is zero, the computer will alarm 15 seconds.
5. CALORIES (CAL):
A. Count the total calories from exercise start to end.