7
TEST
Position the detector so that the coil is over the edge of the wooden table or ask another person to
hold the detector so that the probe is above the ground.
Keep the probe away from walls, floors, and iron objects.
Remove all jewelry, watches, rings, etc.
If possible, switch off all electrical appliances that may disturb the test by the electromagnetic field.
Set the left knob (GAIN) to 12:00.
Set the right (DISC) knob to the left.
Move the nail in front of the coil. Press the + button repeatedly while moving the nail before the coil.
Notice the change in the beep. The sound changes from high to low.
Move the coins in front of the coil. Coins are the most frequently sought-after find. Notice the tones
and the 2-digit number. The object must be moving for the coil to detect it.
Set the DISC value to 60. If you now try to detect a nail, the coil will ignore it.
Press and hold
button and place nickel in front of the coil. Note that no movement is required.
An object without movement is announced by a humming sound. Note the different intensity and
volume of the sound. Move the nickel in front of the probe, notice the changing depth.
Use the MODE knob. The detector switches to the mode where it detects all metals. Set the GAIN
knob to 12:00 o'clock. Slowly turn the THRESHOLD knob counterclockwise.
You will not hear any sound at low setting.
In the middle setting, there will be a transition between no sound and low sound.
At full setting, you will hear a constant loud sound. You may hear the effect of the electromagnetic
field.
HEADPHONES
The detector is
provided
with a 1/4 "jack. Use stereo headphones. Use headphones to extend battery
life. You can hear
better small changes in tones with the headphones.
WARNING
: Do not use headphones near roads or in high-traffic areas.