5
ASSEMBLY
No special tools are required for assembly.
SEZNAM
ČÁSTÍ
1. Console and arm rest
2. Rod
3. Two washers, nut and bolt for the coil
4. Coil 8.5
“x11“
1. Attach the nuts to the holes on the stem on the bottom of the rod.
2. Align the stem and coil holes.
3. Align the stem and coil holes. Connect the coil and stem with a bolt and nut.
4. Use the pin to connect the upper and lower rods.
5. Adjust the total length of the bar using the pin and holes.
6. Wrap the coil cable around the stem and then along the rod.