background image

17 

 

 

A moving part of the treadmill is 
stuck and therefore the motor is 
unable to rotate properly. 

Inspect  the  moving  parts  of  the 
treadmill  to ensure  that  they  are 
operating  correctly.  Check  the 
motor,  listen  for  strange  noises 
and  check  for  a  burning  smell. 
Replace the motor if necessary. 

E06: Motor error 

The motor wire is not connected 
or the motor is damaged. 

Check  motor  wires  to  see  if  the 
motor  is  connected.    If  the  wire 
has 

been 

punctured 

or 

damaged,  you  will  need  to 
replace  it.    If  the  problem  is  not 
solved, you may need to replace 
the motor 

E08: Control Board Abnormality 

The 

control 

board 

is 

not 

connected. 

Check  the  upper  and  middle 
wires  to  see  if  the  control  board 
is  connected.  If  the  wire  has 
been  punctured  or  damaged, 
you will need to replace it. If the 
problem is not rectified, you may 
need  to  replace  the  control 
board. 

E10: Motor abnormality 

The  motor  is  damaged  or  a 
moving  part  of  the  treadmill  is 
stuck and therefore the motor is 
unable to rotate properly. 

The  torque  is  too  big,  please 
adjust the torque. Check moving 
parts  of  the  treadmill  to  ensure 
that they are operating correctly. 
Replace  the  motor  if  necessary. 
Lubricate the treadmill. 

Summary of Contents for IN 21318
























Reviews: