background image

 

Night Time Riding: 

Most  car/bicycle  accidents happen  at night where  an overtaking car  hits a  bike. 

(An  overtaking  car  is  one  that  comes  up  from  behind  and  passes  the  cyclist  on  the  left.)  These 
overtaking accidents can be very serious. 

What can you do?  

First,  you  should  keep  your  youngster  from  riding  at  night.  It  requires  special  skills  and  equipment. 
Few children have either. Secondly, make sure your child understands that if he/she gets caught out 
after  dark  on  a  bike,  the  thing  to  do  is  to  call  you  for  a  ride  home. One  suggestion  is  to  tape  phone 
money to the bike so that, in an emergency, the child will be able to call home.  

Following the Leader:

 There is increased risk of car/bike collision if children are following each other, 

because if the first one does something dangerous, those following may do it too.  

What can you do?  

Teach your child to always assess the traffic situation for him/herself. When a group is riding around, 
each  cyclist  should  stop  for  stop  signs;  each  cyclist  should  look  to  the  rear  before  making  left  turns; 
and so on. One way to get the message across is to play a game with the child similar to Simon Says. 
In this  game,  however,  the  emphasis  should  not  be  on  doing  what  Simon  Says,  but  rather  have  the 
child  make  a  decision  based  on  the  situation.  The  child  should  learn  to  ignore  what  Simon  Says. 
Children need to learn to think for themselves to ride safely.  

SUMMARY:

  Teach  your  child  early 

–  the  earlier  the  better.  Learning  skills  such  as  looking  and 

avoiding hazards 

takes time. Be prepared to repeat lessons until your child understands what you’re 

trying to get across. Be patient. Your efforts will be rewarded, knowing that your child is aware of safe 
riding skills.  

THE BASICS 

1.  Always do the Mechanical Safety Check before you get on a bike. 

2.  Be thoroughly familiar with the controls of your bicycle.  

3.  Be careful to keep body parts and other objects away from the sharp teeth of chainrings; the 

moving chain; the turning pedals and cranks; and the spinning wheels of your bicycle.  

4.  Always wear a cycling helmet which meets the latest Snell or ANSI standard. 

5.  Always wear shoes that will stay on your feet and will grip the pedals. Never ride barefoot or 

wearing sandals. 

6.  Wear bright, visible clothing that is not so loose that it can catch on moving parts of the bicycle 

or be snagged by objects at the side of the road or trail.  

7. 

Don’t  jump  with  your  bike.  Jumping  a  bike,  particularly  a  BMX  bike,  can  be  fun;  but  it  puts 

incredible stress on everything from your spokes to your pedals.  Perhaps most  vulnerable to 
jumping 

–  on  jumping  their  bikes  risk  serious  damage,  to  their  bicycles  as  well  as  to 

themselves.  

RULES OF THE ROAD 

1. 

Learn  the  local  bicycle  laws  and  regulations.  Many  communities  have  special  regulations 

about licensing of bicycles, riding on sidewalks, law regulating bike path and trail use, and so 
on.  Many  states  have  helmet  laws,  child  carrier  laws  and  special  bicycle  traffic  laws.  In  the 
U.S. and in most foreign countries, a bicyclist is required to obey the same traffic laws as the 
driver of a car or motorcycle. It’s your responsibility to know and obey the laws.  

2. 

You  are  sharing  the  road  or  the  path  with  others 

– motorists, pedestrians and other cyclists. 

Respect their rights, and be tolerant if they infringe on yours.  

3. 

Ride  defensively.  Assume  that  the  people  with  whom  you  are  sharing  the  road  are  so 

absorbed with wat they are doing and where they are going that they are oblivious to you. 

4. 

Look ahead of where you’re going, and be ready to avoid:  

Summary of Contents for IN 16920



























Reviews: