15
FORWARDS AND BACKWARDS
1. Position crank arm parallel to the ground.
2. Place ball of foot on pedal with foot parallel to the ground.
3. Position the saddle so that an imaginary line drawn from the
center of your knee to the pedal spindle is vertical. Some
riders move the saddle slightly forward of this positon.
NOTE: Saddle should be horizontal and perfectly aligned with
the bicycle.
4. Tighten saddle clamp nut securely.
Please read and follow all directions in this manual.
Always wear a helmet when you ride.
BRAKE AND BRAKE CABLE INSTALLATION
1. Attach the upper cable to the brake lever by opening the brake
lever and placing the barrel end of the cable into the lever.
2. Feed brake cable through cable adjuster and through anchor
bolt. Secure anchor bolt firmly.
3. Fasten brake caliper to fork by sliding brake mount bolt
through center hole in fork. Secure brake mount bolt firmly.
4. Pull the link wire on the rear brake assembly until the brake
shoes are touching the rim wall and tighten the brake bolt.
5. Ensure that the brake shoes are positioned evenly with the
side surface of the rim.
Refer to the next section for Brake System Adjustments.
