9
STEP 3
•
Adjust the both sides of the lock nut M8 (15) on seat support (82) in proper tight. Seat should
slide smoothly on the seat rail without any shaking.
•
Attach the rear stabilizer (106) to the seat rail (79) using 4 sets of flat washers
ø8 (7) and bolts
M8*15 (9).
STEP 4
4-1. Connect upper sensor wire (65) with lower sensor wire (78).
4-2. Put seat rail (79), main frame (10) and pedal bracket (100) together as shown in the picture.
4-3. Attach seat rail (79), main frame (10) and pedal bracket (100) together by using bolt M12*100 (63)
and lock nut M12 (64).
4-4. Attach pedal bracket (100) to the main frame (10) using flat washers
ø8 (7) and bolts M8*15 (9).
4-5. Attach seat rail (79) to the main frame (10) using washers
ø12 (62) and knob (61).