![background image](http://html1.mh-extra.com/html/insportline/in-13901/in-13901_user-manual_2069091010.webp)
10
Step 2
Attach the rear stabilizer (3) to the main frame (1) and fix them. Use the flat washers (31), spring
washers (30) and the Allen C.K.S. half thread screws (29).
Step 3
Attach the upright post decoration strip (46) to the upper upright post (4). Take the upright post
cover (19) out of the main frame (1) and cover it on the upper upright post (4).
Connect motor communication wire (12) and console communication wire (13) as shown in the
picture.
Attach the upper upright post (4) to the main frame (1) and fix them. Use the curved washer
(33), spring washer (30), Allen C.K.S. half thread screw (34), flat washer (31), spring washer
(30), Allen C.K.S. full thread screw (32), flat washer (31), Allen C.K.S. half thread screw (34),
hex self-locking nut (35), curved washer (33), spring washer (30), Allen C.K.S. full thread
screw (32).
Put the upright post cover (19) and the upright post decoration strip (46) into the main frame
(1).
Attach the bottle holder (20) to the upper post (4) and fasten it with the Philips pan head full
thread screw (36).
NOTICE:
Put the communication wires and the resistance adjustment knob wire into the upright post.
Make sure that all the screws are in the hexagonal hole before you will tighten them.