background image

 

 

Learning Tips  

Learning X3 is much easier than learning how to ride a bicycle. Most starters only need 3 minutes to get 
a hang of it. You’ll need a learning partner standing in front of X3 and holding the handlebar with both 
hands to help stabilize the handlebar for the first time. 

 

Hold on to the handlebar with two hands. Step on X3 and look straight forward. 

 

Put one foot onto the platform first. 

 

Shift your center of gravity on the platform gradually before lifting another foot (imagine goind 
upstairs) 

 

Please try not to move the handlebar, and put another foot onto the platform (imagine standing 
on a flat ground) 

 

Keep calm and relaxed and look forward as shown below. 

 

Please  keep  calm  and  relaxed,  it  is  much  easier  than  learning  how  to  ride  a  bicycle.  Some  starters 
cannot help with some hola-hooping motion when first time getting on X3- It helps imagine the platform 
as  flat ground  and  trust  the  balance  automatically  controlled  by  a  build-in  gyro-system  in  X3.  Please 
stand upright and relaxed and rely on your learning partners to hold on to the handlebar. After getting 
used-to standing on X3

, you’re good to go.  

Note: The more relaxed you are. The better balance you’ll get.  

Go Forward and Backward 

Push the handlebar gradually forward to feel the motion of X3 and the restore the status quo ante to feel 
the acceleration and deceleration. Steer at a slow speed and feel the motion controlled by your center 
of gravity. Look back and lean gradually backward to control X3 fall back, and then restore the status 
quo  ante  to  feel  the  deceleration  and  brake. Keep  practicing  and  pay  attention  to  the  wall  and  other 
obstacles to avoid falling over. 

Summary of Contents for IN 12570 Windrunner Handy X3



















Reviews: