Insportline IN 12570 Windrunner Handy X3, User Manual

Page: 3 / 18

3
Introductinon
X3 is the of-the-art means of transportation adopting aerospace attitude control theory, fuzzy software
algorithm, and gyroscope system to maintain balance by leaning forward and backward. Riders can
control vehicle to go forward, accelerate, decelerate, brake, etc. by leaning forward or backward. Also,
turning on X3 is controlled by the presence of a handlebar and a vertically ascending shaft. The lateral
movement of the handlebar will cause the differential or rotational speed on both wheels, e.g when the
shaft is swung the left, the rotational speed on the handlebar will cause the differential or rotation speed
on both wheels, e.g when the shaft is swung to the left, the rotational speed on the right wheel will be
faster than that on the left wheel, thus the unit will turn left. X3 is the greenest and lightest smart unicycle
which can be easily carried into buses or subways, facilitating daily commute.
INSTALATION
Check Packing Contents
Open the packing box and carefully take out the handle bar and control shaft. Then take out the wheal
assembly.
Given the weight of the wheel assembly, please heave it upward with care. Better find someone for
necessary help. Please pay attention to your hand and the front and rear end of the wheel assembly,
and avoid lifting it by the dirt covers, otherwise your fingers may be caught.
Preparation
Before installation, please find in the standard accessories a set of 2 hexagon wrenches. Please retain
this tool kit, it is useful for maintenance and transportation of the unit, As metric standard tools, you may
find replacement at home or in a hardware store. A pair of work gloves Is recommended to protect your
hands from dirt and scratches.
Install the Handlebar and Control Shaft
Take out the handlebar and control shaft; insert the handlebar into the slot as shown below. Thein install
the handlebar and shaft assembly onto the wheel assembly and fasten the fixing knob clockwise.