Insportline homegym in 133 easy, User Manual

Page: 15 / 22

How to assemble the cables,
CABLE (50): Connect the screw at tip of this cable to the upper weight (46), pass the other tip of the cable
above pulley (a), go down and pass it underneath pulley (b), go up and pass it over pulley (c) and from there
straight to pulley (d).
CABLE (51): Join one end of this cable to butterfly arm (7), by means of the bolt (115), a washer (101), the
grommet on the tip of the cable (51), another washer (101), then on the other side of the butterfly arm’s arc,
put another washer (101) and a nut (102). Take the other end of this cable and pass it over pulley (a1), go
down and pass the cable underneath to pulley (b1), then up again and over pulley (c1) and then connect this
tip of the cable just as done the first time.
CABLE (52): Pass one end of this cable (the one without the ball shape rubber buffer) underneath pulley (a2),
then go to pulley (b2) loop the cable over it and to pulley (c2) loop this pulley again, then go to pulley (d2)
passing the cable underneath this pulley, then go up to pulley (g2), then down so you can secure the end of
this cable to the metal frame of the machine, using the spring hook (25) and the chain (26) as shown in the
picture.
GENERAL EXPLAINING ABOUT CABLE AND PULLEY:
CABLE (50) goes through from pulley d , c, b, to a as drawing marked
CABLE (51) goes through from pulley a1, b1 to c1 as drawing marked
CABLE (52) goes through from pulley a2, b2, c2, d2, e2, f2 to g2 as drawing marked