STEP 8
How to assemble the pulleys:
Pulleys type A): Attach the press arm pulleys set to the press arm support (9), by means of the bolt (112), the
pinching finger protectors (parts 41 & 42), the pulley (57), the washers (101) and the nut (102) f
pulley, and with the bolt (112), the pinching finger protectors, the pulley (57), the washers (101) and the nut
(102) for the lower pulley.
Pulleys type B): Attach the simple pulleys to the threaded rod of the home gym by using a washers (101)
pinching finger protectors (parts 41 & 42), the pulley (57) and the nut (102).
Pulleys type C): Attach the double pulleys by using the bolts type (112), the washers (101), the pinching finger
protectors (parts 41 & 42), the pulleys (56) and the nuts (102
Note: The fort plates (20 & 22) have to be assembles on both right and left side of the upper part of the
vertical support (3) using bolts (114), washers (106) and nuts (107), as
STEP 8. The assembly of the pulley is just as on pulleys type: B.
STEP 9 & STEP 10
Pulleys type A): Attach the press arm pulleys set to the press arm support (9), by means of the bolt (112), the
pinching finger protectors (parts 41 & 42), the pulley (57), the washers (101) and the nut (102) f
pulley, and with the bolt (112), the pinching finger protectors, the pulley (57), the washers (101) and the nut
Pulleys type B): Attach the simple pulleys to the threaded rod of the home gym by using a washers (101)
pinching finger protectors (parts 41 & 42), the pulley (57) and the nut (102).
Pulleys type C): Attach the double pulleys by using the bolts type (112), the washers (101), the pinching finger
protectors (parts 41 & 42), the pulleys (56) and the nuts (102).
Note: The fort plates (20 & 22) have to be assembles on both right and left side of the upper part of the
vertical support (3) using bolts (114), washers (106) and nuts (107), as shown in the upper right corner figure on
pulley is just as on pulleys type: B.
Pulleys type A): Attach the press arm pulleys set to the press arm support (9), by means of the bolt (112), the
pinching finger protectors (parts 41 & 42), the pulley (57), the washers (101) and the nut (102) for the upper
pulley, and with the bolt (112), the pinching finger protectors, the pulley (57), the washers (101) and the nut
Pulleys type B): Attach the simple pulleys to the threaded rod of the home gym by using a washers (101),
Pulleys type C): Attach the double pulleys by using the bolts type (112), the washers (101), the pinching finger
Note: The fort plates (20 & 22) have to be assembles on both right and left side of the upper part of the
shown in the upper right corner figure on
Summary of Contents for homegym in 133 easy
