Insportline Gemini E200, User Manual

Page: 11 / 22

11
Display modes
1. Standby mode
After the console turns on, the dot matrix displays
the user’s basic values – U1 (in km). You
can choose from U1
– U4.
2. Sleep mode
3. When the console in the standby mode, if RPM is lower than 30 or keys no operation for 15
seconds, the program will enter the prompt mode for 16 seconds (after 16 beeps the scale
enters sleep mode). During the timing period of 16 seconds, if RPM is higher than 30 or keys
are pressed, the timing program of 16 seconds will be canceled, and the console will go back
to standby mode.
In the setting page (User setting, weight setting and settings in all programs), if RPM is lower
than 30 for 10 seconds, the program will be end and jump back to standby mode. If RPM is
still lower than 30 or no key operation is detected after 5 seconds, the program will enter
prompt for 16 seconds (after 16 beeps the scale enters sleep mode). During the timing period
of 16 seconds, if RPM is higher than 30 or keys are pressed, the timing program of 16
seconds will be canceled, and the console will go back to standby mode.
When operating all the programs, if RPM has not reached 30, the dot matrix display will show the
rolling string of “RPM↑” for 5 seconds. After that, if the RPM still not reached to 30, dot matrix display
will show the rolling string of “PAUSE” for 5 seconds.
Key functions
START: Press the key and the program will start the function of QUICK START
directly.
RECOVERY: During the exercise, hold the hand pulse sensor until the PULSE
window shows the heart rate value, and then press RECOVERY. After press
RECOVERY, the displays will stop and the TIME window will show count down for
60 seconds. After the time count down to 0, will display will show the result of your
heart rate recovery status with F1~F6. F1 means the best level of the heart rate
recovery status.
PAUSE: After the start the exercise, press PAUSE key, and the program will
immediately operate the action of “pause”. During the setting process within
PROGRAM, press PAUSE key could go back to the program select page for
reworking.
STOP: Press STOP key to stop.
ENTER: During the setting of programs, press ENTER key to confirm and go to
the next page. You
can use ENTER key to switch the display “SPEED - TIME –
DISTANCE / RPM - CALIROES -
WATTS” screen.
DIRECTION KEYS: The direction keys are used for the increase and decrease of
various values (WEIGHT, HEIGHT, AGE, SEX, PULSE, TIME…), selection of
functional modes (WATT, HRP, USER, PROGRAM, MANUAL), and increase or
decrease of resistance.
PROGRAMS
Preset programs (P1
– P12)
1. Press the direction keys to select P1

P12 PROGRAM.