6
CHARGING
Do not use batteries or chargers other than those supplied by the original supplier.
Charge the scooter at room temperature.
1. Remove the rubber cap
2. Connect the charger
3. After recharging, attach the rubber cap again
1.
2.
3.
BATERRY
Do not open the battery. Contacting the battery with metal objects can cause the battery to short
circuit.
Always use only the original charger.
Please recharge the battery after each use.
Do not expose the battery to temperatures below -
20 ° C and above 50 ° C.
Do not dispose of the battery in a fire.
For longer storage than 30 days, fully charge the battery, then recharge every 60 days.
HOW TO RIDE
•
Get to know the product before your first ride and learn how to operate it properly.
•
Always turn slowly and always brake safely and with sufficient braking space.
•
For the first ride, choose a free environment without obstacles.
•
Fully concentrate on riding and do not let anything distract.
•
Use the accelerator only if you have both feet on the scooter board.
Leg Position:
Place one leg on the plate as close as possible to the front of the scooter. Leave the
other leg on the ground. Make sure the track is clear and clean. Start the ride with a slight bend (just
like a classic scooter). Push with that foot that rests on the ground. As soon as you press the
accelerator, try to lean back slightly to prevent falling due to acceleration. When changing speed, try
not to press too much on the handlebar bar. One leg is more in the front and the other in the back.
You can place your feet just like a skateboard for a more comfortable ride and better stability.
NOTE
: Riding a scooter can be dangerous. You use this product on your own responsibility. Be fully
familiar with all regulations and restrictions.
