7
DISPLAY OPERATIONS
1. APPERANCE
2. OPERATIONS
Through short press of MODE button, you can cycle over ODO, CHA, TIME.
ODO will show total travel distance (you cannot reset this value)
CHA will show number of charging
(“00016” means total 16 discharges and charges)
TIME
will show time, you can set up time “MM: SS” (minutes: seconds)
When there is no display operation and scooter is still for 90 seconds, the scooter will
automatically shout down to save electricity. Press the on/off button
for 3 seconds to start
up scooter.
To start up the scooter you first need to put one feet on the scooter and then push the scooter
by the other feet. After you give scooter initial velocity pull the speed control lever to start the
scooter. After that you can use speed control lever to adjust speed.
SERIAL NUMBER
Do not loose serial number of your scooter. Keep it separately and in safe place. Each scooter has
unique serial number. In case of loss or theft you will need the serial number to provide necessary
information. Serial number is on the bottom near the front wheel.
