16
CLEANING
a)
Please power off and pull the plug out before cleaning.
b)
Wipe out the dust stuck on the surface and running board frequently.
c)
Please clean the surface of frame and running belt with a soft cloth dipped with suds, don’t use things
like eradicator and naphtha. (After cleaning, please dry it for use)
d)
Please take the protecting cover off every two month, use vacuum dust-collector to suck the dust
remaining inside of the protecting cover. (The dust will make the components of circuitry board short
circuit)
CAUTIONS, DEPOSITING
Cautions
Please make sure that the plug has been pulled out before cleaning or maintenance.
Depositing
The treadmill should be deposited indoor in case of being damp. Water can’t be spattered and nothing can be laid
and inserted on the treadmill.
Please keep the air a little humid in winter. And please void the big static electricity, it may disturb the operation
of meters or even damage them.
GUIDES FOR MALFUNCTION
Analyzing and eliminating malfunction
Item.
Malfunction
Reasons
Solution
1
Treadmill can’t be
started
The safe key isn’t in the right
position
Put the safe key in the right
position.
The electrical switch is placed to “0”
Turn the electrical switch to “1”.
2
Meter can’t display
The meter and upper communication
line are not connected well
Disassembly meter and check the
upper communication line, make
sure that meter and communication
line are connected well.
The upper communication is broken
Replace it!
3
Heart rate can’t be
displayed
The pole of heart rate sensor is not
wet enough
Wet the pole with water or liquor
for hard contact lenses.
Disturbed by electromagnetism
Stay away from electromagnetism.
4
Incline doesn’t work
The motor wire is not well connected Open the motor cover and
reconnect it.
5
Running belt runs
faster or slower than
what has been
displayed
Unadjusted
Readjust it.
6
Running belt slips
Running belt is not tight enough
Please read point “Maintenance:
The adjustment steps for poly V-
belt/running belt” for reference.
7
Running belt is
deflected
The running belt is unadjusted
Please read point “Maintenance:
The adjustment steps for running
