![background image](http://html1.mh-extra.com/html/insportline/9126-t60i/9126-t60i_user-manual_2069316014.webp)
14
Body fat test
Under ready condition, press “PROG.” key continuously to come into FAT. Press “MODE” key, you could find
F-1, F-2, F-3, F-4, F-5 (F-1-- SEG , F- 2-- AGE , F-3-- HEIGHT, F-4-- WEIGHT, F-5-- FAT displayed on the
window. Press “INCLINE
△
”, “INCLINE
▽
”, “SPEED+”, “SPEED-” to set. After setting, press “MODE ” to
come into “FAT”. At this time, put your hand on the heart pulse for 5-8 seconds, there will be body fat date
displayed on the window. You could find whether your weight and height matches. (This data only for reference,
can’t be used for medical data)
F-1
Sex
01 Men
02 Women
F-2
Age
10------99
F-3
Height
100----200
F-4
Weight
20-----150
F-5
FAT
≤
19
Underweight
FAT
=(20---25)
Normal weight
FAT
=(25---29)
Overweight
FAT
≥
30
Obesity
Power save mode
Our machine has power save function. When you turn on power switch for 10 minutes and don’t press any key,
the machine will come into power save mode and there is no light on the screen. You could press any key into
ready condition.
MAINTENANCE
RUNNING BELT ADJUSTMENTS
Identification ways for the degree of tightness of running belt and poly V-belt.
When the running belt skips, please follow the steps as follows to make sure which belt needs to be adjusted,
running belt or poly V-belt.
a)
Unplug all power supply, screw and remove the base cover.
b)
Turn the speed to be around 3km/h, step on the running belt by pressure and try your best to make the
running belt stop. If running belt stops, together with the front roll, but the motor still runs, under this
condition, it means the poly V-belt needs to be adjusted.
c)
Turn the speed to be around 3km/h, step on the running belt by pressure and try your best to make the
running belt stop. If running belt stops, but front roll still runs, under this condition, it means the
running belt needs to be adjusted.
The adjustment steps for poly V-belt
a)
Unplug all power supply and take off the base cover.
b)
Loosen the four screws for the motor, adjust the V-belt tension bolts in clockwise direction, and then
tighten back the four screws for the motor.
The adjustment steps for running belt
a)
Turn the speed to be 6km/h. for running