![background image](http://html1.mh-extra.com/html/insportline/24174/24174_user-manual_2068932005.webp)
5
Tighten the 2x screws on both upper sides.
Set the appropriate bracket angle.
Press the bracket and tighten the upper bolt.
The pedals are divided into 3 parts.
Both sides of the rod are the same, marked for illustration only.
Screw the nuts into one third of the rod on side A.
Slide side B into the hole in the bracket.
Slide side A into the bracket.
Screw each nut onto the side of the seat bracket.
Make sure that each side is the same length.