6
Φ38
Locate two opposite legs of the trampoline. Place the tubes to thicken the trampoline legs. Place the
brackets onto the trampoline frame, place the curved part onto the frame. Make sure it is placed from
inside out and is placed against the trampoline leg. Then attach the pole holders to the bracket and
connect them with the screw.
STEP 4
Now connect the poles to the brackets. After you inserted all poles, the tent should cover the whole
trampoline. Pull the tent to the end of the trampoline and secure it with sew in straps. Then cover the
brackets with bends on the tent.
FOLDING
To fold the tent, you need to remove the straps and bands and then push the poles in the brackets
down.
