2.3. Set-Up Aircraft
Locate the two parts that make up each side of the landing gear.
Loosen the clamp on the horizontal tube (with rubber feet), then assemble the landing
gear by inserting the vertical tube fully into the horizontal tube. The notches on the end
inserts should line up perpendicularly to the horizontal tube.
Ensure the vertical tube is fully seated before tightening the ratcheting clamp. If there
are o-rings on the vertical tube, insert the tube such that the o-rings are on the lower
half of the assembly. The ratcheting arm can be pulled away from the screw to move the
arm to a more convenient location when tightening.
Once tightened, set the two landing gear legs aside.
11
