Step 24
6 - M6 x 35 Button Head Bolts
6 - M6 Flat Washers
6 - M6 Locknuts
Step 25
6 - End Caps
Step 24: Attach the Exercise Placard to the Row Pulley Mount using:
Six (M6 x 35 Button Head Bolts)
Six (M6 Flat Washers)
Six (M6 Locknuts)
Note: Place the washers under the nuts only. No washers under the head of the button head bolts.
(Wrench Tighten Now)
Step 25: Install End Caps in the front of the Top and Base Beams, and the rear of the Base Beams.
Page 24
Exercise Placard
Row Pulley Mount
