Step 12
4 - M10 x 60 Hex Bolts, Blue Dot
4 - M10 x 95 Hex Bolts
12 - M10 Flat Washers
4 - M10 Locknuts
Step 12: Attach four Guide Rods to the Weight Stack
Four (M10 x 95 Hex Bolts)
Mount using:
Eight (M10 Flat Washers)
Four (M10 Locknuts)
(Wrench Tighten Now)
Attach two Shroud Plate Spacers and two Shroud Mount Four (M10 x 60 Hex Bolts
Plates to the Weight Stack Mount using:
with Blue Dot)
Four (M10 Flat Washers)
NOTE: Be sure smooth flat side of plate is on top and
the single hole is to the back of the machine.
(Finger Tighten Only)
Page 12
Weight Stack
Mount
Guide Rods
Shroud Plate Spacers
Shroud Mount Plates
NOTE: The back side of the Shroud
Mount Plate has only one hole.
