3
3
Basic operations
1
6
6
1
2
3
4
5
Power on and zeroing the torque tester
Press to power on the torque tester.
Usually press to zeroing the torque tester before using it.
C
C
2
Auto power off
The torque tester will auto power off after about 5 minutes idle
C
for power saving. Press to power on the torque tester again.
Caution
: During communication period ( appears), the auto
Send
3
Hardware reset
To do hardware rest, use a pin to touch the system reset button
C
If the tester does not work functionally, please do hardware rest.
5
2. Pre-setting number
1. Torque value
3. Battery status icon
4. T(Track mode)
5. Units(N-m, ft-lb, in-lb, kg-cm)
4. P(Peak hold mode)
Peak hold mode operation
Start
C
Target value
Apply torque
*
Note 1.
Current value
(
Peak
hold
)
Reach 80% of target torque
Current torque value
(( ( ( )) )) ( ( (( )) ))
Buzzer
Green LED
Reach 80% of target torque
Note 3.
*
(( ( ( )) )) ( ( (( )) ))
Buzzer
Red LED
Approached
target
torque
Note 2.
*
Reach
target value
M
Recording
Released
Apply torque
Note 4.
*
Display
screen
power off function is disabled.
and then press to power on the torque tester again.
(System initiate)
5
Lock
the
keys(LOC)
4
Auto-saving(AUTO)
Long
press
key
to
enter
menu, the
screen shows AUTO.
Press
un
and
down
keys
to
select ON or OFF, press back
to initial interface.
U/S
U/S
U/S
Long
press
key
to
enter
menu, then
press
to
make
screen shows LOC.
Press
un
and
down
keys
to
select ON or OFF, press back
to initial interface.
U/S
U/S
