1
2
1
产 品 介 绍
ISH-MRD200 is supplied with auto-load/unload test force part
and is suitable for measuring Rockness hardness of carbide
steel, carbon steel, alloy steel, cast iron and nonferrous metal
etc.
1 . Do not touch the test force dial when loading.
2 . It is necessary to use one-way three-core plug to supply
power, and should follow the rules of local protection.
3. Take off the weight ,indenter and fix the lever inside before
move the hardness tester. And remember to restore the original
packaging and safeguard procedures before long-distance
transport.
Attention
Introduction
Structure
1.light 2.up cover 3.back cover 4.operational panel 5.lock screw
of indenter 6.indenter 7.stage 8. case of lifting screw 9.lifting
handwheel 10.start button 11.power supply hub 12.load dwell
time adjustment 13.fuse 14.on/off button 15.test force dial
1
产 品 介 绍
Installation
2.1 Unpacking and installation:
a. open the wooden box, take out the protection bubbles and
accessary box.
b. open the hardness packaging bag, take out dust cover and
operation manual etc.
c. remove two M10 screws on the base board as picture 1, to
move the hardness tester.
d. the hardness tester should be put on a stable stage after
unpacking, and take the base when moving. And the levelness of
the stage should be no more than 1mm/m.
